Field Crop Update, August 6, 2021

Erik Smith, Area Field Crop Specialist
Central New York Dairy and Field Crops

August 6, 2021

1. Field Observations

We've had some beautiful weather lately, and those who didn't manage to cut hay last week were all out this week. Most of us are right around the 'normal' accumulation of growing degree days (GDD) for this time of year, but we're below normal (near record low) for GDD since corn silking in mid-July. At this rate, most corn acreage may not be ready for silage harvest until perhaps September, but the long-range forecast suggests higher-than-normal temps toward the end of this month. So we still need to be on our toes so maturity doesn't get beyond us when we thought we had more time. Our team will be putting out some pre-harvest corn silage materials via email and snail-mail over the coming weeks, so be on the lookout for that.

So far the corn foliage is still looking clean, and I've yet to see any concerning soybean pathogens or insect pest issues. Lots of acreage suffered from the wet field conditions earlier in the summer, but it's becoming harder to see the residual effect of those issues as canopies fill out. I've heard reports of damaging levels of white mold in soybean crops in western NY, so the culmination of that disease cycle is just around the corner for our region.

Spring grain harvest is here as well, so instead of leaving the field fallow, here are some options for what to plant next: Cropping Options After Small Grain Harvest, and here: Cover Crops for Field Crops Systems. Aside from weed suppression, cover crops can either give you another harvestable forage crop or at the very least, improve soil organic matter and capture nutrients that can be used by next year's crop.

And speaking of weeds, it's that time of year again: If you prefer to call them 'bachelor buttons', then you aren't growing hay. Because in a hayfield or pasture they're known as knapweed, and they're rearing their ugly seed-heads again. There are biocontrol options for knapweeds, but only for certain species - and not all knapweeds are 'spotted knapweed'. We have several species in our area, but only spotted knapweed, Centaurea maculosa, has relatively readily-obtainable biocontrol options.

So if you think you have spotted knapweed in particular, let me know and we can get a positive ID and see if there are biocontrol options available. Otherwise, options are limited.

Timely mowing and pasture clipping are essential to prevent perennial weeds like knapweed, summer asters, and goldenrod from establishing. Clip non-rotational pastures and paddocks several times per year, and clip your rotational pastures after animals leave that paddock. Hayfields should be cut at least twice, and optimally 3+ times per year to prevent these things from gaining traction in the first place. And of course, make sure your fields are properly fertilized to ensure your forage species have the upper hand from the start.

According to Mike Hunter of the North Country Ag Team, the following mixes are our best (but not perfect) options:

Spotted Knapweed control in NY grass hayfields:

Tank mix option #1:
0.625 oz/A Cimarron Plus
8 oz/A Banvel
16 oz/A 2,4-D Ester

Tank mix option #2:
0.5 oz/A Cimarron
8 oz/A Banvel
16 oz/A 2,4-D Ester

The bad news is, this is not the best time to control knapweed. If it's currently flowering, mow it before it sets seed. You can even bale it and dump it in the hedgerow to avoid allowing the seeds to stay in the field. The best time to apply herbicides to knapweed is in spring or fall, when these species are in the rosette stage.

Click to see the latest Oneida County Scouting Report,Northwest NY Crop Alert, Capital Area Ag Report, and New York State IPM Weekly Field Crops Pest Report.


2. Growing Degree Days (GDD) for planting date and silking date as of July 28th (Climate Smart Farming Growing Degree Day Calculator)

GDD are calculated by taking the average daily temperature and subtracting the base temperature for development of a given organism ((High + Low)/2 - base temp = GDD). For corn silage, we are using base 50/86, as corn development starts at 50F and ceases above 86F. Your actual silk date will likely fall sometime within this range of dates no matter where you are and what variety you're expecting to chop. Corn needs 750-800 GDD after silking to reach a whole plant DM of 32%. Under typical late season dry down conditions we can expect the crop to reach 35% DM four to seven days later:

Not everyone planted their corn on one of the planting dates or in one of the locations I have listed, so this chart shows the estimated GDD for each location on each potential planting date in between (based on the actual GDD on those four dates). The locations are ordered top-to-bottom from lowest elevation to highest (the number after the location name is the elevation in feet above sea level). So if your farm is near one of the locations on this list but there's a location here that more closely matches your elevation, try that instead. You can find GDDs for your own specific location and planting date using the Climate Smart Farming CSF Growing Degree Day Calculator, but for those who might have more difficulty using that tool, maybe this chart can help.

3. Pest Monitoring

Potato leafhopper counts have been quite low, and most folks are cutting hay, so there's low risk for this pest at the moment.

Video: Potato Leafhopper Scouting and IPM Thresholds in Alfalfa

This was our biggest week for western bean cutworm (WBC), but while some fields showed increases, others decreased. Numbers from elsewhere in the state suggest that adult populations are currently peaking for this pest, so the fact that most corn crops have tasseled means that we may have avoided potentially damaging infestations (they are most attracted to pre-tassel corn). Sure enough, I scoured each of these fields for egg masses and have yet to find any. Though if you have a later planting and your corn is still pre-tassel, you may be at higher risk.

WBC typically lay eggs in the whorl of pre-tassel corn, so by the time you see the eggs, they're on the top side of leaves in the upper-third of the plant (see pics). Purdue states that the economic threshold for this pest has been reached when 8% of plants have egg masses, and 5% of plants with egg masses and/or young larvae feeding.

Bt corn with Cry1F is said to be resistant to WBC, but not earlier Bt events. A study published a year ago suggests that WBC populations in NY may have evolved resistance to even Cry1F, though the distribution of resistant populations throughout the state is not clear. Rotation is unfortunately ineffective (moths will just fly to the nearest cornfield) unless tillage is employed, which disrupts pupating individuals in the soil. For the time being, it seems that corn planted early enough to tassel before adult flights take place may avoid infestation, while later-planted corn is at higher.






Field Crop Update, August 6, 2021 (pdf; 199KB)


Dairy

Dairy

Livestock

Livestock

Forages

Forages

Grains

Grains

Upcoming Events

Baskets to Pallets Virtual Event

March 21, 2024
March 28, 2024

Are you looking to diversify sales beyond the farmers' market, CSA, and farm stand? Food hubs, grocery stores, restaurants and cooperatives are looking for your products to meet growing consumer demand for local and sustainably produced food. However, successful business with wholesale buyers requires planning and preparation.  Two-day event. 

View Baskets to Pallets Virtual Event Details

Parasite Fecal Analysis Roadshow

March 21, 2024
March 28, 2024
April 5, 2024
April 12, 2024

For Small Ruminants.  Eight locations & times to choose from.  $5 per sample, by appointment.

View Parasite Fecal Analysis Roadshow Details

Pesticide Applicator Exam Prep Course

March 27, 2024 : Pesticide Applicator Exam Prep Course - Johnstown Location
Johnstown, NY

Lunch will be provided


March 29, 2024 : Pesticide Applicator Exam Prep Course - Earlville Location
Earlville, NY

Lunch will be provided.

View Pesticide Applicator Exam Prep Course Details

Announcements

Cash Rent and Custom Harvest Survey

To date, there is limited information available about rental rates and fees for crop harvesting.  Farms can use this valuable information for their farm business planning to help improve decision making and profitability. 

The data that is collected, and the subsequent reports/findings/resources will be helpful for all of us to answer that call of "What's the average rental rate in my area?" and "How much do people charge to combine oats?"

Take the survey here.


Farmers Can Join MeatSuite For Free!

MeatSuite.com is a free resource provided by Cornell University where NY meat farmers can create a farm profile and list their bulk (wholes, halves, quarters) and bundled (i.e. Grilling Bundle) meat products.

Why should farmers join?

1. It's free and easy!
2. Connect with more local customers. In the past year the MeatSuite.com farm directory had 8,300 visits from New York consumers. Farm profiles get as many as 25 views per month from potential local customers. We also spotlight MeatSuite farms on social media and bring attention and purchases to farms through highlights and giveaways.

How do I join?

Farmers can visit https://www.meatsuite.com/farmers/ to create a free farm profile. You must list at least one product for your farm's profile to go live. You'll also have access to Cornell's free Meat Price Calculator, a helpful tool for pricing your meat to make a profit.

While you're on MeatSuite, check out the "Creating Consumer-Friendly Bulk Meats" publication on the log-in page. It has tips on how to create bulk meat products that are easier for first-time buyers to say "yes" to.

If you have any questions as you create your farm profile or products, we're here to help! Please email Matt LeRoux at mnl28@cornell.edu.


Sign Up for Our Weekly E-Newsletter

We send out a bi-weekly e-newsletter that has announcements, upcoming programs, and opportunities for you!  Registration is quick, easy, and free.  Click here to sign up today!

Spotted Lanternfly

Lycorma delicatula, or Spotted Lanternfly (SLF), is an invasive plant hopper from Asia and is an agricultural pest. In the United States, it was first found in Pennsylvania in 2014. Spotted Lanternfly has been found in New York State on Staten Island, all New York City boroughs, Long Island, Port Jervis, Sloatsburg, Orangeburg, Ithaca, Binghamton, Middletown, Newburgh, Highland, and the Buffalo area. SLF threatens the agriculture and forestry industries, and is also a nuisance pest. The nymphs and adults feed on over 70 different plants, but is especially detrimental to grapes, a black walnut, hops, maple trees and apples. New York State Ag and Markets supported CCE efforts to help bring awareness to communities and we developed this Public Service Announcement and would appreciate you sharing it with your member lists. 



CCE Livestock Program Work Team

See the Livestock Program Work Team website for news, upcoming programs, and NYS Slaughterhouse Map.

NEWSLETTER   |   CURRENT PROJECTS   |   IMPACT IN NY   |   SPONSORSHIP  |  RESOURCES   |   SITE MAP